Al ejecutar el comando:

smartctl -d ata -l error /dev/sda

Se muestra el siguiente log:

smartctl version 5.34 [i686-pc-linux-gnu] Copyright (C) 2002-5 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

noel@Noel-Ubuntu-Amd64:~$ sudo smartctl -d ata -l error /dev/sda
smartctl version 5.34 [i686-pc-linux-gnu] Copyright (C) 2002-5 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF READ SMART DATA SECTION ===
SMART Error Log Version: 1
ATA Error Count: 2
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It “wraps” after 49.710 days.

Error 2 occurred at disk power-on lifetime: 716 hours (29 days 20 hours)
When the command that caused the error occurred, the device was active or idle .

After command completion occurred, registers were:
ER ST SC SN CL CH DH
— – — – — – –
84 51 00 96 67 a5 46 Error: ABRT at LBA = 0×06a56796 = 111503254

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
— – — – — – — – —————- ——————–
c4 ff 01 00 00 00 40 00 07:53:33.296 READ MULTIPLE
00 00 08 00 00 00 00 04 07:53:33.279 NOP [Abort queued commands]
c5 ff 08 5f 67 a5 46 00 07:53:33.279 WRITE MULTIPLE
c5 ff 08 5f 67 a5 46 00 07:53:33.279 WRITE MULTIPLE
c5 ff 08 57 67 a5 46 00 07:53:33.279 WRITE MULTIPLE

Error 1 occurred at disk power-on lifetime: 708 hours (29 days 12 hours)
When the command that caused the error occurred, the device was active or idle .

After command completion occurred, registers were:
ER ST SC SN CL CH DH
— – — – — – –
84 51 01 36 00 5e 40 Error: ABRT at LBA = 0×005e0036 = 6160438

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
— – — – — – — – —————- ——————–
c4 ff 01 00 00 00 40 00 00:35:36.110 READ MULTIPLE
00 00 08 00 00 00 00 04 00:35:36.110 NOP [Abort queued commands]
c5 ff 08 67 f4 23 40 00 00:35:36.110 WRITE MULTIPLE
c5 ff 08 67 f4 23 40 00 00:35:36.109 WRITE MULTIPLE
c4 ff 01 bf a1 49 4d 00 00:35:36.109 READ MULTIPLE

¿Esta en la últimas verdad?

Un saludo!

Efectivamente, como dices, es más por lo segundo, ya que como sabrás, el instalar el programa no le hace nada a nuestro sistema a menos que se lo indiquemos por medio del script qeu está al final. Gracias por preguntar.